![]() What is the best way to prepare surfaces for bonding?Īll surfaces should be clean and free of dirt, grease and oil. Cut hard plastic tip of cartridge above the threads.ģ) Replace nozzle by screwing it back onto the threads.Ĥ) Cut nozzle at 45° angle to desired bead size. What is the best way to open the Gorilla Max Strength Construction Adhesive Clear cartridge?ġ) Unscrew and remove nozzle from top of cartridge.Ģ) Set nozzle aside. We realize any DIY project may have a spill and we want to help you with tips and tricks to successfully remove glue from fingers and nails.įor bonded skin, please call 1-80 to speak to a medical professional. ![]() White spirit may be used according to manufacturer’s instructions. Remove any excess adhesive immediately with a dry cloth. Heavy items may require temporary support and mechanical fastening.Ĥ. Within 30 minutes, press surfaces together and hold for 30-60 seconds. When working on uneven surfaces, use enough adhesive to fill gaps.ģ. ![]() Squeeze adhesive on to one surface in a zig-zag pattern. Screw on nozzle and cut to desired bead size.Ģ. Best applied in temperatures between 10☌ and 40☌ in a well-ventilated area.ġ. Use in conjunction with mechanical fasteners when hanging large mirrors.Īll surfaces should be clean and free of dirt, grease, oil and old adhesive. NOTE: Heavy items may require temporary support. Within 10 minutes, press surfaces firmly together.When working on rough, uneven surfaces, use enough adhesive to fill gaps. Apply adhesive to one surface in a zig-zag pattern or inside perimeter of the object.Best if used above 40☏.Ĭut nozzle at 45° angle to desired bead size. TO USE: All surfaces should be clean and free of dirt, grease and oil. Cut hard plastic tip of cartridge above the threads. Unscrew and remove nozzle from top of cartridge.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |